Why choose GYEON Q²M Prep?

GYEON Q²M Prep is a dedicated pre-coating degreaser designed to leave exterior surfaces completely clean and ready for the application of ceramic coatings, sealants and other forms of protection. Its powerful formula removes polishing oils, old wax residue and other contaminants that could otherwise interfere with the bonding of your chosen protection.

Unlike a conventional degreaser that simply lifts oily contamination from the surface, Q²M Prep is formulated to dissolve these residues, making them easier to remove during the final wipe-down. The result is a clean, smooth and antistatic surface that provides the ideal foundation for your next detailing step.

Q²M Prep is particularly important after paint correction, when polishing oils and residues can remain on the paint and potentially mask imperfections or compromise the performance of subsequently applied protection.

Prestige Detailing Tips

• Once you have finished polishing, remove the initial polish residue before carrying out your final wipe-down with Q²M Prep. Pay particular attention to panel edges, creases and other areas where polishing residue can accumulate.
• Spray Q²M Prep generously onto the surface or a clean microfibre towel and thoroughly wipe the panel. Follow with a second clean towel to ensure that any dissolved oils and residue are completely removed.
• For the final wipe-down, we recommend pairing Q²M Prep with GYEON Q²M PolishWipe EVO, which is specifically designed for removing polish residue and preparing paintwork for protection.
• If you are preparing previously contaminated paint for correction and protection, make sure the vehicle has first been properly washed and decontaminated. Q²M Prep should be treated as the final surface-preparation stage rather than a substitute for proper decontamination.
• After completing the final wipe-down, GYEON recommends allowing approximately 5–10 minutes before proceeding with your chosen coating or sealant.