Description

GYEON Q² View EVO is a long-lasting hydrophobic glass coating designed to improve visibility and make exterior automotive glass considerably easier to maintain.

Applied to your windscreen and exterior glass, Q² View EVO creates a highly water-repellent surface that causes rain to bead and rapidly move away as you drive. Its hydrophobic effect becomes particularly noticeable from around 50 km/h, reducing your reliance on the windscreen wipers during wet weather.

The coating also reduces the ability of dirt, road film, ice and other contamination to bond to the glass, helping it remain cleaner and making subsequent maintenance easier.

The EVO formula takes durability a significant step forward, offering real-world protection of up to 24 months or 50,000 km while retaining strong resistance to windscreen-wiper use and alcohol-based washer fluids.

The complete Q² View EVO kit also includes Q²M GlassPolish, allowing you to properly prepare the glass before applying Q² Repel EVO and achieve the strong bond required for maximum performance.

Prestige Detailing Tips

• Preparation is crucial. Thoroughly clean and decontaminate the exterior glass before beginning the coating process.
• Use the supplied Q²M GlassPolish to thoroughly prepare the glass. Remove the polishing residue with a clean, damp microfibre and allow the surface to dry completely before applying Q² Repel EVO.
• Apply Q² Repel EVO evenly in small sections using the supplied applicator. Complete, uniform coverage is essential for consistent water behaviour.
• GYEON’s coating instructions specify allowing the first layer to dry for approximately 15 minutes before applying a second layer without removing the first.
• After another approximately 15 minutes, remove the remaining residue using a damp microfibre until the glass is completely clear and streak-free.
• For maximum durability, GYEON recommends using the full 20 ml bottle across the windscreen and two side windows.
• Once application is complete, keep the glass completely dry for at least 12 hours. This is especially important if applying the coating outdoors, so check the weather forecast beforehand or keep the vehicle sheltered.
• For maximum performance, make sure your wiper blades are clean and in good condition. GYEON also recommends applying a small amount of product to the blades or replacing worn blades.
• Maintain Q² View EVO using a suitable glass cleaner and avoid abrasive cleaning pads that could unnecessarily degrade the coating.